EMG ELDRO®
direct current
EMG ELDRO® thrusters in DC design are used in systems with existing DC mains. The electrical connection of the units must be made in parallel with the motors. Electrical connection of the ELDRO® motors in series is not possible. .
The ELDRO® DC series is also used for opening brakes in the event of a power failure of the three-phase supply. For this purpose, the units are installed in the brake as an additional thruster and can then be supplied with a DC voltage, for example from a battery. This can then be used, for example, to safely set down loads in the hoist.
Have we caught your interest? Get in touch!
"The ELDRO® thruster has existed as a registered trademark since 1931 and has therefore been successful on the market for more than 90 years - an insanely successful product!
EMG ELDRO® meets all requirements of our customers, increases the safety of their brakes and is 100% tested.
With this pretention EMG sets the industry standard for electrohydraulic brake thrusters."
Alex Hoffmann, Area Sales Managerä
Please contact me:
T: +49 2762 612-318
E-Mail: alex.hoffmann@emg-automation.com
![[Translate to English:] ELDRO® EX](/fileadmin/_processed_/6/8/csm_ELDRO-Ex_f81c30e62d.jpg)
