Component discontinuations and qualitative replacement solutions

Component discontinuations and qualitative replacement solutions

The products and solutions of our Metal business unit stand for modern engineering and technology all over the world. Through our reliable support and provision of spare parts, we ensure the long-lasting use of all systems for many years. However, due to the limited storage capacity of certain components - especially those that have not been available on the market for a long time - we can no longer guarantee delivery availability after a certain point in time, despite careful, forward-looking planning. 

The following overview shows you all currently discontinued products and the replacement solutions offered by EMG. For further information, please contact our product management. 

If your component is on the list, don't worry: All EMG products are designed for maximum service life. If our products have done their job without any problems so far, there is every reason to believe that they will continue to do so for a long time to come. 

In the rare event of a defect, EMG has modern alternatives with up-to-date technology available for all discontinued components. These not only offer extended options in use - often even existing sensor components can be reused or, with little effort, upgraded. Simply use our online form to contact our experts - we will be happy to advise you. 

Year

Items

Available as spart part

Succession solution

eBACS

2021

ESA 10-LLL/-/E/IC/IFS/02

ESA 10-LLL/-/E/IC/IFS/01 LLL:250, 400, 500, 800

eBACS

2021

Motor for drive family ESA10, machined,
with pinion part no. 304661 (with motor part no. 168630)

Successor solution compatible for spare parts and new applications
part no. 444423_E (with motor part no. 345522) from 01.10.2021

eBACS

2021

BMI4/60/80/R/S.681
BMI4/60/80/L/S.681

Only on request to check usability of BMI4/60/80/R/S.723
Only on request, to check usability of BMI4/60/80/R/S.723

eBACS

2021

SMI1.13

Not yet available

eBACS

2021

BMI4/60/80/R/S.723
BMI4/60/80/L/S.723
SMI1.05 

ESI4_060_080_165H30RL_HG_-_1
ESI4_060_080_165H30LR_HG_-_1
SMI1.14

eBACS

2021

-

All components are available as spare parts until further notice.
For new projects, the following configurations must be selected:

Strip-guiding-system

2020

EVK and EVM - all analogue
modules, e.g. motherboard
EVK1.02 (231311), EVM1.01 
(231429)

Digital strip controller 
EMG iCON® XE and conversion kit
EVK07.68 incl. electronics
EVK2.11.x (269489)

Strip-guiding-system

2019

IMR-SR.002

IMR-SR.003
No plug compatibility, single coil exchange possible

Strip-guiding-system

2018

BMI 6.xxx

No explosion protection products available for hazardous areas. Also no spare parts.

Strip-guiding-system

2018

SV1-10/.../.../.../Ex

No explosion protection products available for hazardous areas. Also no spare parts.

Strip-guiding-system

2018

ESZ.../11 (up to 2010)

Repairs possible only of electrical components: motor, fan, SCI04, displacement sensor.
Spare part: Complete replacement on ESZ.../21

Strip-guiding-system

2018

ESZ.../01 (up to 2007)

No more repairs possible.
Complete exchange on ESZ.../21

Strip-guiding-system

2018

Light unit H211.24.DC

Light unit H211.24.DC.LED

Strip-guiding-system

2018

Digital controller: EMG iCON® SE

X

For new applications: EMG iCON® XE

eBACS

2017

ESA 10-LLL/-/E/IC/IFS/L1 LL:500, 600, 700, 800, 1200

ESA 10-800/-/E/IC/IFS/L2

Strip-guiding-system

2017

Digital controller: SPC16 with all plug-in cards (e.g. MCU24.xx, …)

X

For new applications: EMG iCON® XE

Strip-guiding-system

2017

SPC16 Plug-in Card GED01 (235195) Generator/Demodulator Card for IWG5

Evaluation electronics MEI2.01. Attention: Change of application program to control amplifier necessary

Strip-guiding-system

2017

Digital controller: IDC 32.xx.yy

X

For new applications: EMG iCON® XE

Strip-guiding-system

2017

Measuring frame BMI2, BMI, BMI2-CP, BMIH-CP,  
BMI2.11.x (motherboard, CANbus)
BMI2.25 (motherboard, analogue)
BMI2.51 (Subprint)
BMI2.55 (Subprint)

For all other BMI items:
Measuring frame: Conversion to SMI-xx incl. conversion package
Electronics: Conversion to SMI electronics (BMI2.15)

Strip-guiding-system

2017

Control for ESZ: Frequency converter of Lenze, device series 8200 and 9200

EMG SCM
Lenze 8400 as spare part available

eBACS

2017

Power Panel PP320 15''TFT TOUCH
(slave, optional at control pulpit)
Part no.: 182774

No longer available as spare part. 
Repair is possible until August 30th, 2027, if technically realisable.

eBACS

2017

Power Panel PP320 5,7''TFT TOUCH (slave)
Part no.: 182751

No longer available as spare part. 
Repair is possible until August 30th, 2027, if technically realisable.

eBACS

2017

APCI Interface 3IF791.9
(connection to slave displays)
mounted in power panel PP420
Part no.: 182492

No longer available as spare part. 
Repair is possible until August 30th, 2027, if technically realisable.
In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible.

2017

Profibus Interface 3IF66.9 Master (Profibus master)
mounted in power panel PP420
Part no.: 182499

No longer available as spare part. 
Repair is possible until August 30th, 2027, if technically realisable.
In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible.

eBACS

2017

Power Panel PP420 5,7''TFT TOUCH (master)
Part no.: 182752

No longer available as spare part. 
Repair is possible until August 30th, 2027, if technically realisable.
In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible.

Strip-guiding-system

2016

SSI 01.1 (Evaluation card of SSI-sensors in SPC16-controller, 231935)

X

available as spare part

Strip-guiding-system

2016

PLM and HF-PLM parallel light receiver

up-to-date measuring sensors

Strip-guiding-system

2016

H4xx and H6xx 50/60 Hz-Light (Light for PLM)

Not available as spare parts. The EU-Eco-Design Directive for EuP (Energy using Product) is an EU regulation. The placing on the market of such products is prohibited.

Strip-guiding-system

2016

Incremental encoder evaluation
INK 01 (231844)

X

available as spare part

Strip-guiding-system

2015

NET21.01 (231801)
ADU01.2 (231807)
ADU01.1 (231825)

For IMH1 evaluation in UMC16 rack.
Follow up solution: SMI1.05

Strip-guiding-system

2015

UMC16-Rack
NET21.02 (231832)
NET21.03 (231850)
NET21.04 (235058)

Follow up solution:
• EMG iCON® XE (recommended)
• Replacement of SPC16+ rack 

Strip-guiding-system

2015

IMM/IMH - Induct. strip centre sensor for the high-temperature range 

X

Available as spare part
Follow up solution:
• IMM2/IMH2 - Induct. 2nd generation strip centre sensor for the high-temperature range (since 2005).
• EMG-Vivaldi® - strip centre sensor for installation outside the furnace (since 2013). Furnace flange conversion is necessary.

Strip-guiding-system

2014

KLW... 014

KLW... 012 with transducer

Strip-guiding-system

2013

DC light unit LIE

X

LLS…/02 (linear light emitter with LED technology)

Strip-guiding-system

2013

MICRONpro

Spare parts on request

Strip-guiding-system

2013

HF-light unit LIC

X

LLS…/01 (linear light emitter with LED technology)

Strip-guiding-system

2013

Complete strip controller SPCc2
(available as spare part)

X

Digital controller: EMG iCON® XE

Strip-guiding-system

2013

Complete strip controller SPCc4
(available as spare part)

X

EMG iCON® Intelligent digital control systemDigital controller: EMG iCON® XE

Strip-guiding-system

2013

BMI2.01 / BMI2.02 analogue evaluation electronics

-

Strip-guiding-system

2013

HR30V05.045A121N,T,D,K

-

Strip-guiding-system

2013

HR30V05W050A121N,T,D,K

-

Strip-guiding-system

2013

HR100 and HA100 with 2,2 kW motor 90L (IE1) 

HR100 und HA100 with 2,2 kW motor 100L (IE2)

Strip-guiding-system

2013

HR250 and HA250 with 9,5 kW motor 132M (IE1) 

HR250 und HA250 with 11 kW motor 160M (IE2)

Strip-guiding-system

2013

HR250V90WU100AA131N,T,D,K

-

Strip-guiding-system

2013

EH-ST... (Electro-hydraulic control unit)

HR040...

Strip-guiding-system

2013

IDC32-10

Digital controller: EMG iCON® XE

Strip-guiding-system

2013

MCU16 

Individual inspection --> MCU24

Strip-guiding-system

2013

MCU16.1

Individual inspection --> MCU24

Strip-guiding-system

2013

SCI 01/SCI 02, sensor CANopen interface for SST stroke sensor

SCI 04 (SST stroke transducer not suitable for connection, only SSI stroke transducer)

Strip-guiding-system

2013

Analogue evaluation electronics BMI2.02

current measuring sensors

Strip-guiding-system

2013

VKI2

VKI3 (1:1 replacement not possible / larger non-metallic space)

eBACS

2013

SCI01-10 Sensor CANopen interface for SST displacement sensor

Please contact service Possible pairwise replacement SCI04-10 no SST encoder can be connected, only SSI encoder

2013

ESA 10-LLL/-/E/SC/IFS/01 LLL:250, 400, 500, 800

Please contact service Possible pairwise replacement ESA 10-LLL/-/E/IC/IFS/02 With replacement of existing displacement sensors

Strip-guiding-system

2010

Analogue control amplifier BLR20
+ BK additional cards
(used until 2000)

Digital controller:
EMG iCON® XE

Strip-guiding-system

2010

MCU22

Digital controller:
EMG iCON® XE

Strip-guiding-system

2010

Light measuring receiver HF-PLE...
LS10.01 light barrier

up-to-date measuring sensors

Strip-guiding-system

2010

Light measuring receiver HF-PLE...
LS10.01 light barrier

up-to-date measuring sensors

Strip-guiding-system

2010

R42D… reflex light barrier

LS42 d.c. light sensor with LED light emitter LID43
No spare part (e.g. reflectors) available

Strip-guiding-system

2010

Reflection sensor TW54

No spare part available; individual inspection

Strip-guiding-system

2009

IMH1.01 analogue evaluation electronics

-

Strip-guiding-system

2009

IM1.002 analogue evaluation electronics

-

Strip-guiding-system

2009

LIH/LIH2 HF-light unit
Fluorescent tubes no longer available

LLS (linear light emitter with LED technology)
The EU Eco-design Directive for EuP (Energy using Product) is an EU regulation that prohibits the placing on the market of such products.

Strip-guiding-system

2009

PDP 01 und PDP01.1 PROFIBUS interface card

MCU24.2 mit PROFIBUS-DP fieldbus interface

Strip-guiding-system

2009

T19.004 analogue strip position controller

Digital controller:
EMG iCON® XE

Strip-guiding-system

2009

T19.001 analogue strip position controller

Digital controller:
EMG iCON® XE

Strip-guiding-system

2009

SPC1501 digital strip position controller

Digital controller:
EMG iCON® XE

Strip-guiding-system

2009

T18.004 analogue strip position controller

Digital controller:
EMG iCON® XE

Strip-guiding-system

2000

GL 240/100

-

Need assistance?
We can help!

Your Contact